الملف الكامل لتحويل دونغل microbox 2 الى microbox 1
اليكم الملف الكامل لتحويل microbox 2 
الى microbox 1
1.rom.bin: MB s/w
2.bootv106_clone.bin: MB Clone bootloader
3.bootid.bin: MB BootID
4.m.bin 
How to program the first S/W to MB clone?
Firstly Replace the MB Flash with new flash, it will not start. 
Run GxDump.exe 
To setup the following parameters:
Act: Read
Base: C000
Lenth: 4000
3. Click SaveAs: to same the file bootid.bin, then click Open, then Link. Start the MB power, you will get the file bootid.bin.
Copy the file bootid.bin to MBClone folder, then run minibox_clone.bat, you will get new file M.bin.
you can use GxDump.exe to program the file M.bin into flash or you can use the MB2 flash programmer to program it.

Note: Every Flash the BootID is different, so every flash need read the bootid.bin. In the future, then we can release s/w to update directly!  
ناتي الى التحميل

0 التعليقات :

إرسال تعليق